CM Fatty Front End

The ORIGINAL kit to add a big front tire to your Cruzin Cooler®.

Once you ride a cooler with our "Fatty" front end you wont be able to go back to stock.  It's MUCH MUCH MUCH stronger than stock, and has a bigger 3" tire which lasts aproximatly 5 times longer than the stock 2 inch tire. 

We build it,  then strip and powder coat (Thick, strong paint) if desired.  Handlebars fold down for easy loading and storage.  However, the front end no longer "slides" off.  The only way to remove the front end is to remove the 5 screws that hold it to the cooler.

One of the best mods we have come up with to improve the handling and stability of the cooler.  Bumps and holes in the pavement are no longer a problem.  No more going over the bars because the front wheel sunk into soft ground.

We now have a "Fatty" rear conversion also!  No more poping tires!  No more expen$ive special rear tires! Check it out!

Other "Chopper" kits use the stock wheel/tire....lets look at the difference between the stock tire and our "Fatty":

See a little difference?

Video:  STEERING STRENGTHENER vs STOCK vs our "FATTY" front end!  - Youve got to see this to understand the difference!

The front brakes option adds front disc brakes which stop you so much better than the stock rear brake only setup its unbelievable. See the video below for a demonstration.

Fatty w/ front brakes vs rear brakes only  - Night and Day difference!

Once you go "FATTY" you never go back!

Install time: 20 Minutes

Install Dificulty: 2 (Scale is from 1-5 with 5 being the most dificult)

Tools Necessary for Installation

• Phillips and Slotted Screwdrivers
• Plyers
• Allen Wrench's (Came with your cooler tool kit)